Jump to letter: [
ADFGHKLMNOPRSWZ
]
wanpipe-modules-2.6.18-53.1.4.el5: Sangoma WANPIPE package for Linux. It contains the WANPIPE kernel drivers. Please install wanpipe-util package for wanpipe utilties and configuration files.
| Name: | wanpipe-modules-2.6.18-53.1.4.el5 |
Vendor: | Sangoma Technologies Inc. |
| Version: | 3.2.4 |
License: | GPL |
| Release: | 0 |
URL: | www.sangoma.com |
- Summary
- Linux Drivers for Sangoma AFT Series of cards and S Series of Cards. Wanpipe supports the following protocols, TDM Voice, Frame Relay, X25(API), PPP,Multi-link PPP, CHDLC and custom API development for WAN and Voice.
Install Wanpipe-util package for wanpipe utilities and configuration files.
Changelog
- * Thu Mar 6 14:00:00 2008 Nenad Corbic <ncorbic{%}sangoma{*}com> - Stable - 3.2.4
========================================================================
- Updated for 2.6.24 kernels
TDM Voice (Zaptel) tested with 2.6.24 kernel.
Known issues: WAN protocols are broken for 2.6.24 kernels.
Its a compilation issue that will be fixed ASAP.
- TDM API bug fix
Check for max frame size on audio stream
- Updated for Zaptel 1.4.9
- AFT IRQ Throttling feature
This feature is use to protect the server from
terrible lines. In some cases a bad hdlc line can
cause thousands of interrupts per sec. Rx errors are now
throttled so that system does not get compromized.
- AFT RTP TAP Feature
RTP TAP Feature allows user to tap voice channels during
Asterisk-Zaptel/TMD API operation at the driver/kernel level.
Each voice stream is encapsulated in UDP/RTP header and transmitted over
neghbouring ethernet address directly from kenrel space.
Tapping 4E1s worth of voice channels adds estra 2% system load :)
http://wiki.sangoma.com/wanpipe-voice-rtp-tap
- AFT Software Ring Buffers on A200/A400 Analog Cards
This feature improves analog preformance under Asterisk/TDM API
mode. In particualr it improves faxing reliability and
minimizes frame slippage due to system load or bad incoming
clock from the line.
Note: All AFT T1/E1 cards have this feature in hardare :)
- * Fri Jan 18 14:00:00 2008 Nenad Corbic <ncorbic{%}sangoma{*}com> - Stable - 3.2.3
========================================================================
- No changes from 3.2.2
Version updated for versioning sake.
- * Fri Jan 18 14:00:00 2008 Nenad Corbic <ncorbic{%}sangoma{*}com> - Stable - 3.2.2
========================================================================
- AFT Maxim Front end update
Implemented graceful recovery on short circuit.
- AFT Driver update
Added a check for TDM IRQ timeout.
On some machines its possible for TDM IRQ to timeout.
- SMG updated
Fixed wancfg_smg
MTU not properly set on ports 2 and up
Voice only ports were not being added to startup sequence
Updated for callweaver
- Added Zaptel 1.4 HW HDLC Support
No Sangoma zaptel patch needed with Zaptel 1.4
- Added HWEC Noise flag in wanpipe config file
- Updated SMG
- Updated E1 Unframed on Maxim Cards
- Updates for AFT PMC and MAXIM framers
PMC - lowered LOS sensitivity
Fixes fake up/down state changes on
started inactive lines.
MAXIM - lowered sensistivy
Fixes cable cross talk on 8 port cards.
- Enabled Unframed E1
- Enabled Tri-State Mode
- Fixed loopback commands
- Fixed HWEC_PERSIST_DISABLE
This option was broken in previous release
This option lets Asterisk control HWEC
on each call start/stop.
By default all hwec channels are enabled on
device startup.
- Updated SMG/SS7
- Updated loopback commands for AFT Maxim cards
- Updated for AstLinux
The make file can now build all WAN and Voice Protocols
- Fixed add_timer warnings for ALL AFT cards
Caused when a port is left in unconnected state.
- Updated legacy protocols for new front end architecture
- Updated Setup script